Omron E2A-M18KN16-WP-B1 2M Proximity Sensor
Omron E2A-M18KN16-WP-B1 2M is an M18 unshielded inductive proximity sensor with a 16 mm sensing distance, 0 to 12.8 mm setting distance, and short-body construction. It uses a PNP output with NO operation, a pre-wired 2 m cable, and a 12 to 24 VDC supply. Ferrous metal is the specified detectable object, using a 48 × 48 × 1 mm standard sensing object. Response frequency is 400 Hz, current consumption is 10 mA max., and differential travel is 10% max. of sensing distance. A yellow operation indicator and IP67 protection are listed. The E2A-M18KN16-WP-B1 2M is included among M18 proximity sensors from Omron sensing products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2A-M18KN16-WP-B1 2M |
Omron E2A-M18KN16-WP-B1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M18 |
| Mounting | Unshielded |
| Sensing Distance | 16 mm |
| Setting Distance | 0 to 12.8 mm |
| Body Length | Short body |
| Output Configuration | PNP |
| Operation Mode | NO |
| Connection | Pre Wired Cable Length 2M |
| Power Supply Voltage | 12 to 24 VDC |
| Body Material | Brass |
| Thread Length | 39 mm |
| Overall Length | 59 mm |
| Standard Target | 48×48×1 mm |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 400 Hz |
| Current Consumption | 10 mA max |
| Indicator | Operation indicator (Yellow LED) |
| Protection Circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Ambient Temperature Range | Operating: −40°C to 70°C, Storage: −40°C to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating: 35% to 95%, Storage: 35% to 95% |
| Insulation Resistance | ±10% max. of sensing distance at 23°C within temperature range of −25°C to 70°C ±15% max. of sensing distance at 23°C within temperature range of −40°C to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current carry parts and case |
| Vibration Resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions |
| Shock Resistance | 1,000 m/s2, 10 times each in X, Y and Z directions |
| Voltage Influence | ±1% max. of sensing distance in rated voltage range ±15% |
| Degree Of Protection | IP67 |
| Weight | Approx. 160 g |
The Omron E2A-M18KN16-WP-B1 2M Proximity Sensor combines an M18 unshielded inductive sensing body with a 16 mm sensing distance, a 0 to 12.8 mm setting distance, and short-body construction. It uses a PNP output with NO operation through a pre-wired 2 m cable and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with a 48 × 48 × 1 mm standard sensing object. Response frequency is 400 Hz, current consumption is 10 mA max., and differential travel is 10% max. of sensing distance. A yellow operation LED is provided. Output reverse-polarity protection, power-source reverse-polarity protection, surge suppression, and short-circuit protection are specified.
Environmental data for the E2A-M18KN16-WP-B1 covers -40 to 70°C during operation and -40 to 85°C during storage, with humidity from 35% to 95%. Temperature influence is ±10% max. of sensing distance at 23°C from -25 to 70°C and ±15% max. from -40 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, dielectric strength is 1,000 VAC for 1 minute, and voltage influence is ±1% max. within rated voltage ±15%. The brass body carries IP67 protection. For another pre-wired PNP NO E2A sensor with an M30 shielded body and 15 mm sensing distance, see E2A-M30KS15-WP-B1 2M.
