+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-18024AP Power Supply

Omron S8VS-18024AP SMPS is a 180 W switch mode power supply configured to provide 24 VDC with 7.5 A rated output current. It operates from 100 to 240 VAC at 50/60 Hz and uses DIN rail mounting for organized electrical-panel installation. Screw terminals and terminal blocks provide fixed connection points for input and output wiring. Typical efficiency is specified at 85% with 100 VAC input and 87% with 200 VAC input. A green output indicator provides operating status. Within the S8VS Series, the S8VS-18024AP provides a DIN rail 180 W, 24 VDC configuration. Compare other 180W SMPS models from Omron machine control products.

Omron S8VS-18024AP Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-18024AP

Omron S8VS-18024AP Power Supply - Technical Specifications

SpecificationValue
Power rating180 W
Output voltage24 VDC
Rated output current7.5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency85% typ. (at 100 VAC input) 87% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.9 A max., 2.2 A typ. (at 100 VAC input) 1.6 A max., 1.1 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time580 ms typ. (at 100 VAC input) 490 ms typ. (at 200 VAC input)
Hold time70 ms typ. (at 100 VAC input) 70 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight850 g max.

The Omron S8VS-18024AP Power Supply provides 180 W rated power with a 24 VDC output and 7.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured cabinet installation. Typical efficiency is specified at 85% with 100 VAC input and 87% with 200 VAC input. These electrical values define a 24 VDC supply where connected equipment voltage, continuous current demand, incoming source, available DIN rail space, and terminal access should be checked together. Connected loads should require 24 VDC and stay within the rated 7.5 A output. The fixed screw-terminal format provides defined input and output wiring points within the panel.

Comparing this model with lower-power 24 VDC configurations helps determine whether the connected load actually requires 7.5 A capacity. A 120 W unit in the same voltage class provides 5 A and may be sufficient where total load current is lower. Because the nominal output voltage remains 24 VDC, the comparison can focus on current requirement and power capacity rather than voltage conversion. DIN rail space and wiring access should then be checked for the chosen model. For a lower-capacity DIN rail configuration providing 120 W, 24 VDC, and 5 A output, compare the Omron S8VS-12024A.