+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-18024-F Power Supply

Omron S8VS-18024-F SMPS is a 180 W switch mode power supply configured to deliver 24 VDC with 7.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured panel installation. Screwless terminals and terminal blocks provide the electrical connection arrangement for incoming power and the 24 VDC output circuit. Typical efficiency is specified at 85% with 100 VAC input and 88% with 200 VAC input. A green output indicator provides operating status. The screwless terminal format distinguishes this version from related screw-terminal models. Within the S8VS Series, the S8VS-18024-F provides a DIN rail 180 W, 24 VDC configuration. Compare other DIN rail SMPS models from Omron control products.

Omron S8VS-18024-F Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-18024-F

Omron S8VS-18024-F Power Supply - Technical Specifications

SpecificationValue
Power rating180 W
Output voltage24 VDC
Rated output current7.5 A
Terminal typeScrewless Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency85% typ. (at 100 VAC input) 88% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.9 A max., 2.2 A typ. (at 100 VAC input) 1.6 A max., 1.1 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time570 ms typ. (at 100 VAC input) 470 ms typ. (at 200 VAC input)
Hold time58 ms typ. (at 100 VAC input) 62 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight850 g max.

The Omron S8VS-18024-F Power Supply provides 180 W rated power with a 24 VDC output and 7.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screwless terminals and terminal blocks for cabinet installation. Typical efficiency is specified at 85% with 100 VAC input and 88% with 200 VAC input. These values define a 24 VDC supply where connected equipment voltage, total current demand, source compatibility, rail space, and terminal access should be considered together. Connected loads should require 24 VDC and remain within the rated 7.5 A output. The screwless terminal arrangement distinguishes this version from related S8VS models that use screw terminals.

When selecting between same-voltage models, rated current and total power become the main electrical differences after the 24 VDC requirement is confirmed. A lower-power 60 W model provides 2.5 A and may suit smaller connected loads, while this 180 W configuration provides three times that current capacity. Mounting remains DIN rail, so wiring method and available cabinet space can also influence selection. The models should therefore be compared according to actual load current rather than wattage alone. For a lower-capacity 24 VDC configuration providing 60 W and 2.5 A, compare the Omron S8VS-06024B.