Omron S8VS-12024AP Power Supply
Omron S8VS-12024AP SMPS is a 120 W switch mode power supply designed to provide 24 VDC with 5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured installation inside electrical control panels. Screw terminals and terminal blocks provide fixed input and output wiring connections. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. A green output indicator provides operating status. Within the S8VS Series, the S8VS-12024AP provides a DIN rail 120 W, 24 VDC configuration. Compare other 120W 24V power supplies from Omron industrial automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VS-12024AP |
Omron S8VS-12024AP Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 120 W |
| Output voltage | 24 VDC |
| Rated output current | 5 A |
| Terminal type | Screw Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 83% typ. (at 100 VAC input) 85% typ. (at 200 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 1.9 A max., 1.5 A typ. (at 100 VAC input) 1.1 A max., 0.72 A typ. (at 200 VAC input) |
| Input Leakage current | 0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input) |
| Input Frequency | 50/60Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15% With V.ADJ |
| Start-up time | 650 ms typ. (at 100 VAC input) 520 ms typ. (at 200 VAC input) |
| Hold time | 56 ms typ. (at 100 VAC input) 56 ms typ. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -10 to 60 ? |
| Ambient temperature (Storage) | -25 to 65 ? |
| Ambient humidity (OperatingStorage) | 25 to 85% |
| Cooling fan | No |
| Weight | 550 g max. |
The Omron S8VS-12024AP Power Supply provides 120 W rated power with a 24 VDC output and 5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for panel installation. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. These values define a 24 VDC supply where connected load voltage, continuous current demand, source compatibility, DIN rail space, and terminal access should be reviewed together. Connected equipment should require 24 VDC and keep total current demand within the rated 5 A output. The fixed terminal arrangement provides defined connection points for the incoming AC source and outgoing DC circuit.
When comparing related S8VS models, output voltage should be confirmed first because the connected equipment must match the supply voltage. Once the 24 VDC requirement is fixed, rated current and total power become the main electrical differences. A lower-power model can be appropriate where the load requires less current, while a higher-power model can provide additional current without changing the nominal voltage. This helps keep model selection tied to actual connected demand rather than wattage alone. For a lower-capacity DIN rail model providing 90 W, 24 VDC, and 3.75 A output, compare the Omron S8VS-09024A.


