Omron S8VK-WA48024 Power Supply
Omron S8VK-WA48024 SMPS is a 480 W switch mode power supply designed to deliver 24 VDC with 20 A rated output current. It accepts 200 to 240 VAC input at 50/60 Hz and supports three-phase, single-phase, or two-phase connection configurations. DIN rail mounting supports structured cabinet installation, while Push-In Plus terminals and terminal blocks provide fixed wiring points. Typical efficiency is specified at 94% with three-phase 200 VAC and three-phase 230 VAC input. A green LED provides output status indication. The 24 VDC output and 20 A capacity provide a higher-current configuration than the 240 W version. Within the S8VK-WA Series, the S8VK-WA48024 provides a DIN rail 480 W, 24 VDC configuration. Compare other 480W 24V power supplies from Omron automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-WA48024 |
Omron S8VK-WA48024 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 480 W |
| Output voltage | 24 VDC |
| Rated output current | 20 A |
| Terminal type | Push-In Plus Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 94 % typ.(at three-phase 200 VAC input) 93 % typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 94 % typ.(at three-phase 230 VAC input) 94 % typ.(Single-phase/two-phase 230 VAC input) |
| Rated input voltage | 200 to 240 VAC(Three-phase/single-phase/two-phase) |
| Rated input current | 1.6 A typ.(at three-phase 200 VAC input) 2.6 A typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 1.4 A typ.(at three-phase 230 VAC input) 2.3 A typ.(Single-phase/two-phase 230 VAC input) |
| Input Leakage current | 1.0 mA max.(at three-phase 200 VAC input) 1.0 mA max.(at three-phase 230 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (LED: Green) |
| Output voltage variable range | 24 to 29.5 V (with V.ADJ) |
| Start-up time | 1000 ms max.(at three-phase 200 VAC input) 1000 ms max.(at three-phase 230 VAC input) |
| Hold time | 30 ms typ.(at three-phase 200 VAC input) 30 ms typ.(at three-phase 230 VAC input) |
| Vibration resistance | 10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | ?40 to 70°C |
| Ambient temperature (Storage) | ?40 to 85°C |
| Ambient humidity (OperatingStorage) | 95% max. (Storage humidity: 95% max.) |
| Cooling fan | No |
| Degree of protection | IP20 by EN/IEC 60529 |
| Weight | 1050 g max. |
The Omron S8VK-WA48024 Power Supply provides 480 W rated power with a 24 VDC output and 20 A rated current. It accepts 200 to 240 VAC at 50/60 Hz and supports three-phase, single-phase, or two-phase input configurations. DIN rail mounting, Push-In Plus terminals, and terminal blocks provide structured panel installation and wiring. Typical efficiency is specified at 94% with three-phase 200 VAC and three-phase 230 VAC input. These characteristics define a higher-current 24 VDC configuration where connected load demand, input arrangement, available rail space, and terminal access should be considered together. Continuous connected current should remain within the rated 20 A output.
The 480 W model can be compared directly with lower and higher S8VK-WA 24 VDC configurations because the nominal output voltage remains the same. A 240 W version provides 10 A, while a 960 W version provides 40 A according to the supplied data. This allows selection to focus on actual connected current requirements after confirming the 24 VDC load. For a higher-capacity DIN rail model providing 24 VDC at 40 A, compare the Omron S8VK-WA96024.


