+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G10005C Power Supply

Omron S8FS-G10005C SMPS is a 100 W switch mode power supply configured to provide 5 VDC for industrial control equipment requiring higher output current. It delivers 16 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz. Direct mounting supports fixed installation inside electrical panels, while screw terminals provide input and output wiring connections. Typical efficiency is specified at 79% with 100 VAC input and 81% with both 200 VAC and 230 VAC input. A green indicator provides output status during operation. Within the S8FS-G Series, the S8FS-G10005C provides a direct-mount 100 W, 5 VDC configuration. Compare other 100W 5V power supplies from Omron control solutions.

Omron S8FS-G10005C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G10005C

Omron S8FS-G10005C Power Supply - Technical Specifications

SpecificationValue
Power rating100 W
Output voltage5 VDC
Rated output current16 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency79 % typ.(at 100 VAC input) 81 % typ.(at 200 VAC input) 81 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.1 A typ.(at 100 VAC input) 1.2 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time12 ms typ.(at 100 VAC input) 70 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight400 g max.

The Omron S8FS-G10005C Power Supply provides 100 W rated power with a 5 VDC output and 16 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed electrical-panel installation. Typical efficiency is specified at 79% with 100 VAC input and 81% with both 200 VAC and 230 VAC input. A green indicator provides output status during operation. These specifications define a low-voltage, high-current configuration where 5 VDC compatibility should be established before current capacity, mounting arrangement, or incoming source is considered.

The connected load should specifically require 5 VDC and keep total demand within the 16 A rating. Direct mounting requires an appropriate fixed panel surface, while screw terminals provide the wiring interface. A useful comparison within the same voltage and power class can show how current capacity and mounting method differ between series. For a 100 W 5 VDC model providing 20 A with DIN rail mounting, compare the Omron S8FS-C10005.