+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C35048 Power Supply

Omron S8FS-C35048 SMPS is a 350 W switch mode power supply configured to provide 48 VDC at a rated output current of 7.32 A. It uses single-phase input, direct mounting, and screw terminals for fixed installation in industrial electrical panels. The metal-frame unit has a stated efficiency of 88% and supports 100 to 240 VAC rated input, with allowable ranges of 90 to 264 VAC and 254 to 373 VDC. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, while the terminal block faces upward. Within the S8FS-C Series, the S8FS-C35048 provides a direct-mount 350 W, 48 VDC configuration. Compare other 350W 48V power supplies from Omron automation equipment.

Omron S8FS-C35048 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C35048

Omron S8FS-C35048 Power Supply – Technical Specifications

SpecificationValue
Power rating350W
Output voltage48V
Rated output current7.32A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC254-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency88%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height50mm
Width112.5mm
Depth212mm
FeaturesTerminal block facing upward
Allowable supply voltage AC90-264 V

The Omron S8FS-C35048 Power Supply provides 350 W rated power with a 48 VDC output and 7.32 A rated current. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, while allowable ranges extend from 90 to 264 VAC and 254 to 373 VDC. The metal-frame unit has a stated efficiency of 88%. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, with the terminal block facing upward. These specifications define the model as a higher-voltage supply where output-voltage compatibility, available current, panel depth, incoming supply, and wiring clearance should be assessed before installation.

The connected load should operate from 48 VDC and remain within the 7.32 A rated output. Direct mounting requires sufficient panel surface, while the 212 mm depth influences cabinet fit. The upward-facing terminal block also needs clearance for conductor routing. Wattage alone should not drive model selection because a different nominal voltage changes the electrical relationship with connected equipment. For a 350 W model using a lower 36 VDC output with 9.7 A rated current, compare the Omron S8FS-C35036J.