+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C15015J Power Supply

Omron S8FS-C15015J SMPS is a 150 W switch mode power supply configured to deliver 15 VDC with a rated output current of 10 A. It uses single-phase input, DIN rail mounting, and screw terminals for electrical-panel installation. Efficiency is specified at 85% typical with 115 VAC input and 86% typical with 230 VAC input. The supported input ranges are 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. The unit operates from -20 to 60°C without a fan. Within the S8FS-C Series, the S8FS-C15015J provides a DIN rail 150 W, 15 VDC configuration. Compare other 15V SMPS power supplies from Omron industrial controls.

Omron S8FS-C15015J Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C15015J

Omron S8FS-C15015J Power Supply - Technical Specifications

SpecificationValue
Power rating150 W
Output voltage15 VDC
Rated output current10 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency85 % typ.(at 115 VAC input) 86 % typ.(at 230 VAC input)
Rated input voltageSingle phase 90 to 132 VAC , Single phase 180 to 264 VAC , 254 to 373 VDC
Rated input current2.8 A typ.(at 115 VAC input) 1.6 A typ.(at 230 VAC input)
Input Leakage current0.50 A typ.(at 115 VAC input) 0.75 A typ.(at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10% to 10% (with V. ADJ)
Start-up time740 ms max.(at 115 VAC input) 730 ms max.(at 230 VAC input)
Hold time27 ms max.(at 115 VAC input) 31 ms max.(at 230 VAC input)
Vibration resistance10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions 10 to 500 Hz, 0.26-mm half amplitude for 1 h each in X, Y, and Z directions
Shock resistance150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Ambient temperature (Operating)-20 to 60°C
Ambient temperature (Storage)-40 to 85°C
Ambient humidity (OperatingStorage)20% to 90% (Storage humidity: 10% to 95%)
Cooling fanNo
Weight500 g max.

The Omron S8FS-C15015J Power Supply combines 150 W rated power with a 15 VDC output and 10 A rated current for compatible industrial loads. It uses single-phase input, DIN rail mounting, screw terminals, and terminal blocks for panel wiring. Efficiency is specified at 85% typical with 115 VAC input and 86% typical with 230 VAC input. The supported incoming ranges are 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. A green output indicator shows operating status, and V.ADJ permits -10% to 10% output adjustment. The unit operates from -20 to 60°C without a fan and weighs up to 500 g. These specifications define the model through voltage, current, input conditions, mounting arrangement, and operating environment.

A suitable load should require 15 VDC and keep total current demand within the 10 A rating. DIN rail availability and terminal access should be confirmed independently from the electrical output requirement. The input range determines source compatibility, while the output rating determines how much connected load the supply can support. Comparing the same nominal voltage keeps the relationship focused on capacity instead of changing the electrical requirement. For a smaller 15 VDC supply with 50 W rated power and 3.4 A output current, see the Omron S8FS-C05015.