Omron D4MC-5020 Limit Switch
Omron D4MC-5020 is a panel-mount limit switch with a 12.7 mm × 5 mm stainless steel roller plunger for accurate mechanical position detection. The panel-mount design supports compact integration through a machine surface, while the roller actuator provides smooth contact with cams, slides, and moving workpieces. Its SPDT contact form provides changeover switching for general control loads, and IP67 protection supports factory environments exposed to dust or moisture. Long mechanical and electrical durability suit repeated machine cycles. The D4MC-5020 belongs to the D4MC Series within the panel-mount roller plunger switch range from Omron machine control products for dependable position and travel detection.
| Brand | Omron |
| Product | Limit Switch |
| Model Number | D4MC-5020 |
Omron D4MC-5020 Limit Switch – Technical Specifications
| Specification | Value |
|---|---|
| Ctuator | Panel mount roller plunger 12.7 dia. x 5 Stainless steel roller |
| Contact Form | SPDT |
| Frequency | 50/60 Hz |
| Load | General load |
| Ambient Temperature | Operating: -10 to 80 ℃ |
| Ambient Humidity | 35 to 95% RH |
| Pollution Degree | 3 (IEC947-5-1) |
| Shock Resistance | Destruction: 1,000 m/s 2 max. Malfunction: 100 m/s 2 max. |
| Degree Of Protection | IP67 |
| Contact Resistance Initial Value | 15 mΩ max. |
| Durability | Electrical: 500,000 operations min. Mechanical: 10 million operations min. |
| Insulation Resistance | 100 MΩ min. (at 500 VDC) |
The Omron D4MC-5020 Limit Switch uses a 12.7 mm × 5 mm stainless steel panel-mount roller plunger for accurate mechanical position detection. The panel-mount format allows the actuator to project through a machine surface, while the rolling contact suits cams, slides, and moving workpieces that pass across the sensing point. Its SPDT contact form provides changeover switching for general loads at 50/60 Hz. IP67 protection helps the switch operate around dust, water, and common factory contaminants, while the -10 to 80°C operating range supports repeated use across varied industrial environments.
The D4MC-5020 is specified for at least 10 million mechanical operations and 500,000 electrical operations, supporting frequent switching over a long service life. Initial contact resistance is 15 mΩ maximum, while insulation resistance is 100 MΩ minimum at 500 VDC. The switch operates with 35 to 95% relative humidity and is specified for pollution degree 3 under IEC947-5-1. Destructive shock resistance reaches 1,000 m/s² maximum, while malfunction shock resistance reaches 100 m/s² maximum. These characteristics combine panel mounting, roller-plunger actuation, SPDT switching, and sealed environmental protection for dependable position and travel sensing in automated machinery. For a related D4MC panel-mount roller plunger with the same actuator dimensions, see the D4MC-5040 model.
