Omron D4C-2332 Limit Switch
Omron D4C-2332 is a compact limit switch with a sealed roller plunger for repeatable mechanical position detection. The roller actuator provides smooth contact with cams, slides, conveyors, and other moving targets, helping reduce sliding friction during frequent operation. A 5 m VCTF oil-resistant cable supports installations where the switch is positioned away from the control point, while the sealed construction suits factory areas exposed to oil, dust, or moisture. The D4C-2332 belongs to the D4C Series within the sealed roller plunger limit switch range from Omron industrial control products for machine travel and end-position sensing.
| Brand | Omron |
| Product | Limit Switch |
| Model Number | D4C-2332 |
Omron D4C-2332 Limit Switch – Technical Specifications
| Specification | Value |
|---|---|
| Electrical Ratings | 5 A at 125 VAC |
| Cable Specifications | VCTF oil- resistant cable |
| Cable Length | 5 m |
| Actuator | Sealed roller plunger |
The Omron D4C-2332 Limit Switch uses a sealed roller plunger actuator for mechanical position detection where a moving machine part contacts and rolls across the actuator. This configuration is useful when the target does not press squarely against a fixed pin plunger and a rolling contact point is preferred. The switch is rated for 5 A at 125 VAC and is supplied with a 5 m VCTF oil-resistant cable, allowing the sensing point to be installed away from the control enclosure without adding a separate field cable at the switch. The enclosed construction supports use around factory automation, machine tools, conveyors, and repetitive mechanical movement.
D4C-2332 is primarily distinguished by its sealed roller plunger, 5 m prewired cable, and 125 VAC switching rating. The oil-resistant cable supports routing through machine environments where lubricants or cutting-fluid exposure may be present, while the sealed actuator helps isolate the internal switching mechanism from the surrounding installation. When selecting this model, actuator approach, cable length, switching load, and available mounting space are more useful comparison points than unrelated secondary specifications. Its roller contact also makes it a practical option where a moving cam or workpiece passes across the detection point. For another D4C model using a cross roller plunger for directional mechanical detection, see the D4C-4233.
