Home Wenglor Fiber-Optic Cable Amplifiers Fiber-Optic Cable Amplifiers Series P1XD012 Wenglor P1XD012 Photoelectric Sensor The Wenglor P1XD012 Photoelectric Sensor offers 10 ... 30 V DC supply voltage, 0.9 kHz switching frequency, -25 ... 60 °C temperature range, IP50 degree of protection. Manufactured by Wenglor under the Wenglor Photoelectric Sensor category, this model belongs to the Wenglor P1X Series .
Brand Wenglor Product Type Fiber-Optic Cable Amplifiers Model Number P1XD012
Wenglor P1XD012 Photoelectric Sensor – Technical Specifications Specification Value Switching Hysteresis < 15 % Light Source Red Light Service Life (T = +25 °C) > 100,000 h Max. Ambient Light 10,000 Lux Supply Voltage 10 ... 30 V DC Supply Voltage with IO-Link 18 ... 30 V DC Current Consumption (Ub = 24 V) < 30 mA Switching Frequency 0.9 kHz Response Time 263 µs On-/Off-Delay 0 ... 200 ms Temperature Drift < 10 % Temperature Range -25 ... 60 °C Switching Output Voltage Drop < 2 V Switching Output/Switching Current 100 mA Short Circuit Protection yes Reverse Polarity Protection yes Overload Protection yes Teach Mode NT, MT, MT with dynamic readjustment, jump detection, DT, BT, WT IO-Link transmission speed COM2 Interface IO-Link V1.1 Protection Class III Setting Method Potentiometer Housing Material Plastic, ABS
Plastic, PC
Plastic, PA Degree of Protection IP50 Connection M8 × 1; 4-pin DIN-Rail mounting 35 mm Weight 33 g MTTFd (EN ISO 13849-1) 640.47 a IO-Link yes Output Push-pull, NPN, PNP Circuit Error output, inactive, NC+NO Switching frequency (speed mode) 1.8 kHz
