Home Wenglor Photoelectric Sensors Through-Beam Sensors P2KE010 Wenglor P2KE010 Photoelectric Sensor The Wenglor P2KE010 Photoelectric Sensor offers 10,000 mm range, Receiver sensor type, 10 ... 30 V DC supply voltage, IP68, IP69K degree of protection. Manufactured by Wenglor under the Wenglor Photoelectric Sensor category, this model belongs to the Wenglor Through-Beam Series .
Brand Wenglor Product Type Through-Beam Sensors Model Number P2KE010
Wenglor P2KE010 Photoelectric Sensor – Technical Specifications Specification Value Range 10,000 mm Light Source Laser (red) Service Life (T = +25 °C) 100,000 h Sensor Type Receiver Supply Voltage 10 ... 30 V DC Current Consumption (Ub = 24 V) < 15 mA Temperature Range -40 ... 50 °C Reverse Polarity Protection yes Protection Class III Housing Material Stainless steel, V4A (1.4404 / 316L) Degree of Protection IP68, IP69K Connection M8 × 1; 3-pin Optic Cover Plastic, PMMA Weight 42 g MTTFd (EN ISO 13849-1) 1,913.81 a Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Switching point Smallest Recognizable Part see Table 1 Switching Hysteresis < 10 % Max. Ambient Light 10,000 Lux Supply Voltage with IO-Link 18 ... 30 V DC Switching Frequency 4,500 Hz Switching Frequency (interference-free mode) 2,000 Hz Response Time 0.11 ms Response time (interference-free mode) 0.25 ms Switching Output Voltage Drop < 2 V Switching Output/Switching Current 100 mA Residual Current Switching Output < 50 µA Short Circuit Protection yes Overload Protection yes Interface IO-Link V1.1 Setting Method Potentiometer IO-Link yes Output Push-pull
NPN
PNP Circuit NC
NC/NO
NO Laser Class (EN 60825-1) 1 Temperature Drift (-10 °C < Tu < 40 °C) 10 % *
