If you’re not fully sure about P3PC001, taking a closer look at Sick Diffuse Sensor, Wenglor P1Kh006 and Wenglor Photoelectric Sensor often helps compare reliability, cost, and availability.
Wenglor P3PC001 Photoelectric Sensor
The Wenglor P3PC001 Photoelectric Sensor offers 30 ... 80 mm working range, 13 µm reproducibility maximum, 18 ... 30 V DC supply Voltage , M12 × 1; 5-pin connection. Manufactured by Wenglor under the Wenglor Photoelectric Sensor category, this model belongs to the Wenglor laser Series.
| Brand | Wenglor |
| Product Type | Photoelectric Sensor |
| Model Number | P3PC001 |
Wenglor P3PC001 Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Working Range | 30 ... 80 mm |
| Setting Range | 30 ... 80 mm |
| Reproducibility maximum | 13 µm |
| Reproducibility: 1 Sigma | 0.8 µm |
| Linearity Deviation | 40 µm |
| Switching Hysteresis | < 0.5 % |
| Light Source | Laser (red) |
| Wavelength | 655 nm |
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 50 mA |
| Switching Frequency | 650 Hz |
| Response Time | < 0.5 ms |
| Temperature Drift | < 2.5 µm/K |
| Temperature Range | -30 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 1.5 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Setting Method | Teach-In |
| Housing Material | Aluminum, anodised Plastic, ABS |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 5-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 69 g |
| Output | Error Output Push-pull NPN PNP |
| Circuit | NC NC/NO NO |
| Other parameters | Exposure time Laser light Switching hysteresis Teach-in mode Off-delay On-delay |
