If youβre not fully sure about E2E-X7D2-M1, taking a closer look at Omron SMPS 24V 10A, Proximity Sensor M18 Pnp No and IFM Proximity Sensor often helps compare reliability, cost, and availability.
Omron E2E-X7D2-M1 Proximity Sensor
The Omron E2E-X7D2-M1 Proximity Sensor offers Inductive, M18, Shielded, 7 mm Sensing distance, M12 Connector, DC 2-wire , NC , 12 to 24 VDC Power supply voltage. Manufactured by Omron under the Omron Proximity Sensors category, this model belongs to the Omron E2E Series.
| Brand | Omron |
| Product Type | Proximity Sensor |
| Model Number | E2E-X7D2-M1 |
Omron E2E-X7D2-M1 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensing head size | M18 |
| Type | Shielded |
| Sensing distance | 7 mm |
| Setting distance | 0 to 5.6 mm |
| Differential travel | 15% max. of sensing distance |
| Sensing object | Iron, 18 x 18 x 1 mm |
| Response frequency | 0.5 kHz |
| Connection method | M12 Connector |
| Differential distance | Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) |
| Power supply voltage | 12 to 24 VDC |
| Control output (Load current) | 3 to 100 mA Diagnostic output: 50 mA for -D1(5)S models |
| Control output (Residual voltage) | 3 V max. (Load current: 100 mA, Cable length: 2 m. M1J-T models only: 5 V max.) |
| Indicator | D1 Models: Operation indicator (red LED), setting indicator (green LED) D2 Models: Operation indicator (red LED) |
| Protective circuit | Surge suppressor, output load short-circuit protection (for control and diagnostic output) |
| Output Configuration | DC 2-wire |
| Operation mode | NC |
| Ambient temperature range | Operating: β25 to 70Β°C, Storage: β40 to 85Β°C (with no icing or condensation) |
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) |
| Temperature influence | Β±10% max. of sensing distance at 23Β° C in the temperature range of β25Β° C to 70Β° C |
| Voltage influence | Β±1% max. of sensing distance in the rated voltage range Β±15% |
| Insulation resistance | 50 MΞ© min. (at 500 VDC) between current-carrying parts and case |
| Dielectric strength | 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Degree of protection | IEC 60529 IP67 (Pre-wired models, pre-wired connector models: JEM standard IP67g (waterproof and oil-proof)) |
| Material Case | Brass-nickel plated |
| Material Sensing surface | PBT |
| Material Clamping nuts | Nickel-plated brass |
| Material Toothed washer | Zinc-plated iron |
| Weight | Approx. 40 g |
The Omron E2E-X7D2-M1 is often compared with other models in the E2E Proximity Sensor group due to shared installation characteristics and consistent sensing behavior. Engineers frequently evaluate Omron E2E-X10D2-M1TGJ-U 0.3M (M30, 10 mm sensing, Shielded, DC 2-Wire, NC, M12 Pre-wired Smartclick Connector, 0.3 m Length), Omron E2E-X10MY2 2M (M18, 10 mm sensing, Unshielded, AC 2-Wire, NC, Pre-wired 2 M Cable), and Omron E2E-X3D1-M1GJ (M12, 3 mm sensing, Shielded, DC 2-wire, NO, Pre-wired connector) when selecting suitable alternatives. This helps maintain compatibility when matching head size, sensor type, output logic, operation mode, and connection method. The E2E-X7D2-M1 fits smoothly into machinery, fixtures, conveyors, and automation setups requiring dependable detection from an Omron Proximity Sensor.
Related Products
