Omron CP1L-L14DR-A Programmable Logic Controller

The Omron CP1L-L14DR-A PLC CPU Unit combines 8 digital inputs with 6 relay outputs for small industrial automation and compact machine-control applications. This Programmable Logic Controller provides a 5K-step program capacity and supports 100 kHz high-speed counters for applications requiring rapid input counting and sequence processing. The controller operates from an AC power supply and includes a built-in USB port for programming, setup, and monitoring. Its relay outputs provide electrical switching for connected control loads in compact automated equipment. The CP1L-L14DR-A combines compact CPU processing with high-speed counting and relay switching and belongs to the compact PLC control range supporting Omron machine control.

Brand	Omron
Product Type	Programmable Logic Controller
Model Number	CP1L-L14DR-A

Specification	Value
Control method	Stored program method
I/O control method	Cyclic scan with immediate refreshing
Power Supply	100 to 240 VAC 50/60 Hz
Output method	Relay output
Inputs	8
Outputs	6
Program language	Ladder diagram
Operating voltage range	85 to 264 VAC
Power consumption	30 VA max.
External power supply	200 mA at 24 VDC
Insulation resistance	20 MΩ min. (at 500 VDC) between the external AC terminals and GR terminals
Dielectric strength	2,300 VAC at 50/60 Hz for 1 min between the external AC and GR terminals, leakage current: 5 mA max.
Noise immunity	Conforms to IEC 61000-4-4. 2 kV (power supply line)
Vibration resistance	Conforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z directions for 80 minutes each. Sweep time: 8 minutes × 10 sweeps = total time of 80 minutes)
Shock resistance	Conforms to JIS C60068-2-27. 147 m/s2 3 times each in X, Y, and Z directions
Ambient operating temperature	0 to 55°C
Ambient humidity	10% to 90% (with no condensation)
Ambient operating environment	No corrosive gas
Ambient storage temperature	−20 to 75°C (Excluding battery.)
Power holding time	10 ms min.
Function blocks	Maximum number of function block definitions: 128 Maximum number of instances: 256; Languages usable in function block definitions: Ladder diagrams, structured text (ST)
Instruction length	1 to 7 steps per instruction
Instructions	Approx. 500 (function codes: 3 digits)
Instruction execution time	Basic instructions: 0.55 μs min. Special instructions: 4.1 μs min
Common processing time	0.4ms
Inrush current *	100 to 120 VAC inputs: 20 A max. (for cold start at room temperature) 8 ms max. 200 to 240 VAC inputs: 40 A max. (for cold start at room temperature), 8 ms max.