| Number of inputs | 1 voltage or 1 current (10 A/1 A) |
| Measurement error/uncertainty | 3 mΩ/0.2 Ω/12.5 MΩ |
| Measurement error/uncertainty 2 | 0.01% DC voltage measurement at 40°C |
| Housing - Design form | compact terminal housing with signal LEDs |
| Housing - Material | polycarbonate |
| Housing - Dimensions (W x H x D) | 12Â mm x 100Â mm x 68 mm |
| Housing - Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Housing - Side by side mounting by means of | double slot and key connection |
| Housing - Marking | labeling of the BZxxxx series |
| Housing - Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Housing - Connection cross-section | s*: 0.08..2.5 mm²,st*: 0.08...2.5 mm²,f*: 0.14..1.5 mm² |
| Housing - Connection cross-section AWG | s*: AWG28..14,st*: AWG28..14,f*: AWG26...16 |
| Housing - Stripping length | 8…9 mm |
| Housing - Current load power contacts | Imax: 10 A |
| Conversion time | 0.5 s (1 s during measuring range switching) preset, min. 65 ms |
| Electrical isolation | 1500 V (E-bus/field potential) |
| Current consumption E-bus | 150 mA |
| Bit width in the process image | 32 bit data, 16 bit control/status |
| Special features | automatic or manual range selection, 1.25 A fuse installed + spare fuse, filter deactivatable, with external calibration certificate |
| Weight | approx. 70 g |
| Operating temperature | -25...+60°C |
| Storage temperature | -40....+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE |
| Pluggable wiring | for all ESxxxx terminals |
| Measuring current | 100 mA, 1 A and 10 A via high current path |
| Measuring voltage | 300 mV, 3 V, 30 V, 300 V |
| Measuring procedure | DC with arithmetic averaging, AC with true RMS value calculation |
| Update time | 0.5 s, 1 s for measuring range selection |
