If you’re not fully sure about BANNERENGINEERING-SM-HA-5A, taking a closer look at Banner Photoelectric Sensor, Sick Safety Relay and Banner Bannerengineering Es Fa 11Aa often helps compare reliability, cost, and availability.
Banner SM-HA-5A Safety Relay
The Banner SM-HA-5A Safety Relay offers 3, rating, Screw terminal type. Manufactured by Banner under the Banner Safety Relay category, this model belongs to the ATK Series.
| Supply Voltage | 230 V ac; 12-24 V dc |
| Safe Output Rating | Relay - 6 A |
| Power Consumption | 4 W / 7 VA |
Banner SM-HA-5A Safety Relay – Technical Specifications
| Specification | Value |
|---|---|
| Type | SM Series Pressure Sensitive Safety Mat Relays |
| IP Rating | IP20 |
| Power | AC/DC Universal |
| Supply Voltage | 230 V ac; 12-24 V dc |
| Device Type | Safety Relay |
| PL Rating | e |
| Recovery Time | 350 |
| SIL Rating | 3 |
| Vibration | 10-60 Hz at 0.35 mm |
| LCD Display | No |
| In-Series Diagnostics | No |
| Max Operating Temperature ( °C) | 50 |
| Relative Humidity | 90% @ 50° C |
| SISTEMA | PFHd = 5.8 x 10-8 |
| Safety Module Type | Safety Mat Module |
| Expandable | No |
| Dimension (H x W x D in mm) | 84 x 45 x 118 |
| Input Operation | 4-Wire |
| Number of Safe Inputs | 1 |
| Input Configuration | 2 NC |
| Independently Controlled Safe Outputs | 1 |
| Output Configuration | 4 NO |
| Non Safe Output Rating | Relay - 5 A |
| Safe Output Rating | Relay - 6 A |
| Splittable Safe Output | No |
| Mechanical Life (Operations in Millions) | 20 |
| Power Consumption | 4 W / 7 VA |
| Response Time (ms) | 35 (max.) |
| Terminal Type | Screw |
| Removable Terminals | Yes |
| Electrical Life (Cycles @ VA) | 150,000 @ 1500 VA |
| Safety Category Rating | 4 |
| E-Stops/Rope Pulls | No |
| Safety Mat | Yes |
| Motor Speed | No |
| Muting | No |
| Gate Switch (NC/NC) Input | No |
| Gate Switch (NC/NO) Input | No |
| Gate Switch (OSSD) Input | No |
| Light Curtains/Scanner with EDM Input | No |
| Light Curtains/Scanner without EDM Input | No |
| Non Safe Output Configuration | 1 NC, 2 PNP |
| Safety Input - Dual Channel (Dry Contact) | 20-100 mA @ 12-30 V dc |
| Safety Input - Reset | 20-50 mA @ 12-30 V dc |
| Input Resistance | 250 Ω max. per channel |
| Recovery Time (ms) | 350 |
