If youโre not fully sure about BS5-Y1M-P, taking a closer look at Autonics Proximity Sensor, Autonics Digital Counter and Autonics Bs5 T1M P often helps compare reliability, cost, and availability.
Autonics BS5-Y1M-P Photomicro Sensor
The Autonics BS5-Y1M-P Photomicro Sensor offers Through-beam type, 5mm sensing distance, Infrared LED(940nm) light source, 5-24VDC power supply, PNP open collector output control output. Manufactured by Autonics under the Autonics Photomicro Sensor category, this model belongs to the Autonics BS5 Series.
| Brand | Autonics |
| Product Type | Photomicro Sensor |
| Model Number | BS5-Y1M-P |
Autonics BS5-Y1M-P Photomicro Sensor โ Technical Specifications
| Specification | Value |
|---|---|
| Sensing type | Through-beam type |
| Sensing distance | 5mm |
| Sensing target | Opaque |
| Min. sensing target | โฅร0.8mmร2mm |
| Hysteresis(distance) | โค0.05mm |
| Response time | Light ON: Max. 20ใฒ, Dark ON: Max. 100ใฒ |
| Response frequency | 2kHz |
| Light source | Infrared LED(940nm) |
| Operation mode | Light ON/Dark ON(set by control wire) |
| Indicator | Operation indicator (red LED) |
| Power supply | 5-24VDC |
| Current consumption | Max. 30mA |
| Control output | PNP open collector output |
| Load voltage | โค30VDC@(=) |
| Load current | Max. 100mA |
| Residual voltage | NPN: โค1.2VDC@(=), PNP: โค 1.2VDC@(=) |
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Insulation resistance | โฅ20 Mฮฉ (250 VDC@(=) megger) |
| Noise immunity | The square wave noise (pulse width: 1ใฒ) by the noise simulator ยฑ240VDC@(=) |
| Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
| Vibration | 1.5mm amplitude (max. acceleration 196m/sยฒ) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
| Shock | 15,000 m/sยฒ (approx. 1,500G) in each X, Y, Z direction for 3 times |
| Environment_Ambient illumination | Fluorescent lamp: Max. 1,000lx(received illumination) |
| Environment_Ambient temperature | -20 to 55โ, storage : -25 to 85โ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Protection structure | IP50 (IEC standard) |
| Connection | Cable type |
| Material | Case: PBT, Sensing part: PC |
| Weight_Body | Approx. 50g |
The Autonics BS5-Y1M-P Groove-Depth 9 mm Photomicro Sensors use a through-beam sensing type with a fixed 5 mm sensing distance, detecting opaque targets as small as ร0.8 mm ร 2 mm. Its hysteresis of โค0.05 mm delivers stable, repeatable performance in fast-paced manufacturing environments like part positioning and label detection.
Operating on 5โ24 VDC ยฑ10% and consuming a maximum of 30 mA, the BS5-Y1M-P offers high-speed response times of 20 ฮผs (Light ON) and 100 ฮผs (Dark ON) with a 2 kHz response frequency. The 940 nm infrared LED ensures reliable detection even under ambient light up to 1,000 lx. Its PNP open collector output integrates seamlessly with PLCs and industrial controllers, while reverse polarity and overcurrent protection enhance operational safety.
Built with a robust PBT + PC housing rated IP50, the Autonics BS5-Y1M-P Groove-Depth 9 mm Photomicro Sensors withstand vibration up to 196 m/sยฒ and shocks up to 15,000 m/sยฒ. Operating reliably from -20ยฐC to 55ยฐC, they are engineered for continuous use in demanding conditions, backed by the proven reliability of the Autonics brand.
The Autonics BS5-Y1M-P Groove-Depth 9 mm Photomicro Sensors are widely used for label detection, component sensing, and position verification in packaging, electronics, and automated assembly lines. Their rapid switching speed supports conveyor sorting, high-speed inspection, and product counting without process delays. Maintenance engineers value the cable-type design for secure, stable installation, while OEMs trust their consistent accuracy and durability for long-term, high-cycle industrial operations.
