In most procurement cycles, BS5-T2M-P is considered with Autonics Proximity Sensor, Autonics Digital Counter and Autonics Bs5 L2M P, giving decision-makers confidence that theyโve chosen the most dependable component.
Autonics BS5-T2M-P Photomicro Sensor
The Autonics BS5-T2M-P Photomicro Sensor offers Through-beam type, 5mm sensing distance, Infrared LED(940nm) light source, 5-24VDC power supply, PNP open collector output control output. Manufactured by Autonics under the Autonics Photomicro Sensor category, this model belongs to the Autonics BS5 Series.
| Brand | Autonics |
| Product Type | Photomicro Sensor |
| Model Number | BS5-T2M-P |
Autonics BS5-T2M-P Photomicro Sensor โ Technical Specifications
| Specification | Value |
|---|---|
| Sensing type | Through-beam type |
| Sensing distance | 5mm |
| Sensing target | Opaque |
| Min. sensing target | โฅร0.8mmร2mm |
| Hysteresis(distance) | โค0.05mm |
| Response time | Light ON: Max. 20ใฒ, Dark ON: Max. 100ใฒ |
| Response frequency | 2kHz |
| Light source | Infrared LED(940nm) |
| Operation mode | Light ON/Dark ON(set by control wire) |
| Indicator | Operation indicator (red LED) |
| Power supply | 5-24VDC |
| Current consumption | Max. 30mA |
| Control output | PNP open collector output |
| Load voltage | โค30VDC@(=) |
| Load current | Max. 100mA |
| Residual voltage | NPN: โค1.2VDC@(=), PNP: โค 1.2VDC@(=) |
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Insulation resistance | โฅ20 Mฮฉ (250 VDC@(=) megger) |
| Noise immunity | The square wave noise (pulse width: 1ใฒ) by the noise simulator ยฑ240VDC@(=) |
| Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
| Vibration | 1.5mm amplitude (max. acceleration 196m/sยฒ) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
| Shock | 15,000 m/sยฒ (approx. 1,500G) in each X, Y, Z direction for 3 times |
| Environment_Ambient illumination | Fluorescent lamp: Max. 1,000lx(received illumination) |
| Environment_Ambient temperature | -20 to 55โ, storage : -25 to 85โ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Protection structure | IP50 (IEC standard) |
| Connection | Connector type |
| Material | Case: PBT, Sensing part: PC |
| Weight_Body | Approx. 30g |
Autonics BS5-T2M-P Groove-Depth 9 mm Photomicro Sensors use a fixed 5 mm sensing distance and a through-beam design to detect targets as small as ร0.8 mm ร 2 mm. The ultra-fast 20 ฮผs Light ON and 100 ฮผs Dark ON response times ensure accurate detection in high-speed industrial processes like PCB positioning and automated packaging lines.
Powered by 5โ24 VDC ยฑ10% and consuming just 30 mA, the Autonics BS5-T2M-P Groove-Depth 9 mm Photomicro Sensors employ a 940 nm infrared LED to deliver stable performance even under varying light conditions. The reliable PNP open collector output is protected by reverse polarity and short-circuit prevention circuits for safe integration with control systems.
Built for durability, the Autonics BS5-T2M-P Groove-Depth 9 mm Photomicro Sensors feature a rugged PBT + PC housing with IP50 protection, resistance to shocks up to 15,000 m/sยฒ, and vibration endurance for demanding production environments. These qualities make them a dependable choice for long-term use in precision manufacturing and automation, backed by the trusted Autonics Sensors & Controllers range.
Autonics BS5-T2M-P Groove-Depth 9 mm Photomicro Sensors are ideal for high-speed label detection, component verification, and position sensing in packaging, electronics manufacturing, and automated assembly. Their quick response suits conveyor sorting, filling lines, and quality inspection tasks. Maintenance teams value the connector-type design for rapid replacements, while OEMs trust the sensorโs consistent performance in continuous, high-cycle applications across diverse industrial sectors.
