The Omron NX-MD6121-6 Machine Automation Controller is a compact Communications Interface Unit combining 16 high-speed inputs (NPN/PNP compatible) and 16 NPN outputs for precise control across automation systems. It supports Switching Synchronous and Free-Run I/O refreshing, delivering rapid 0.1 ms ON / 0.8 ms OFF output performance. Inputs operate between 20 μs and 400 μs, enabling accurate signal capture in dynamic environments. With a 24 VDC power supply and 5.80 W consumption, it integrates smoothly into NX machine architectures. Manufactured by Omron, part of the Omron Programmable Logic Controller (PLC) range, available under the Omron NX Series.
Switching Synchronous I/O refreshing and Free-Run refreshing
ON/OFF response time
Outputs: 0.1 ms max./ 0.8 ms max. Inputs: 20 μs max./ 400 μs max.
Dimensions (mm)
72 × 100 × 90 mm (W×H×D)
Power supply voltage
24 VDC (20.4 to 28.8 VDC)
Unit power consumption
5.80 W max.
Shock resistance
Conforms to IEC 60068-2-27. 147 m/s2, 3 times in X, Y, and Z directions
Vibration resistance
Conforms to IEC 60068-2-6. 5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m/s2, 100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total).
Noise immunity
2 kV on power supply line (Conforms to IEC 61000-4-4.)
