+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Phoenix REL-MR-110DC/21-21/MS Single Relay

The Phoenix REL-MR-110DC/21-21/MS Single Relay (Part No: 1012698 ) offers a 110 V DCnominal input voltage UN, 88 V DC ... 242 V DC (20 Β°C) input voltage range, 250 V AC/DC switching voltage, Plug / solder connection method. Manufactured by Phoenix under the Phoenix Single Relay category, this model belongs to the Phoenix REL Series.

Phoenix Contact REL-MR-110DC/21-21/MS 1012698
BrandPhoenix Contact
Product TypeSingle Relay
Model NumberREL-MR-110DC/21-21/MS

Phoenix REL-MR-110DC/21-21/MS Single Relay – Technical Specifications

SpecificationValue
Product typeSingle relay
Mechanical service life5x 106 cycles
Insulation-
Overvoltage category-
Pollution degree-
Service life electricalsee diagram
Maximum power dissipation for nominal condition0.43 W
Test voltage (Winding/contact)5 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)5 kV AC (Changeover contact/changeover contact)
Rated insulation voltage-
Rated surge voltage-
Nominal input voltage UN110 V DC
Input voltage range88 V DC ... 242 V DC (20 Β°C)
Drive and functionmonostable
Drive (polarity)non-polarized
Typical input current at UN3.6 mA
Typical response time6 ms
Coil voltage-
Status display-
Contact switching type2 changeover contacts
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Minimum switching voltage12 V (at 10 mA)
Limiting continuous current8 A
Maximum inrush current16 A (20 ms)
Min. switching current10 mA (at 12 V)
Interrupting rating (ohmic load) max.2000 VA (for 250 V AC)
Connection methodPlug / solder connection
Width12.7 mm
Height29 mm
Depth25 mm
Degree of protection-
Degree of protection (Installation location)-
Ambient temperature (operation)-40 Β°C ... 70 Β°C
Ambient temperature (storage/transport)-40 Β°C ... 85 Β°C
Standards/regulationsEN 61810-1
Mounting type-
Mounting position-
Mains frequency-
Typical release time range-
Coil resistance-
Switching capacity-
Motor load according to UL 5081/4 HP, 120 V AC (N/O contact)
Input power dissipation for UN-
3-phase motor load-
Product family-
Relay type-
Test voltage ()-
Degree of protection (Relay)-
Inrush current, minimum-
Non-operate voltage-
Safe operate voltage-
Test voltage (N/O contact / N/O contact)-
Give Us a Call for Phoenix 110 V DC Voltage Miniature Relay REL-MR-110DC/21-21/MS part no: 1012698 at the lowest pricing. In-depth Technical Analysis of REL-MR-110DC/21-21/MS, 1012698 feature mechanical service life of 5x 106 cycles, designed for demanding industrial applications. The sensor operates at a nominal input voltage of 110 V DC, with an input voltage range of 88 V DC ... 242 V DC (20 Β°C). The typical input current at UN is 3.6 mA with a response time of 9 ms. The sensor supports a maximum switching voltage of 250 V AC/DC, and a minimum switching voltage of 12 V (at 10 mA). It has a limiting continuous current of 8 A, with a maximum inrush current of 16 A (20 ms), and a minimum switching current of 10 mA (at 12 V). The interrupting rating for ohmic loads is 2000 VA (for 250 V AC). The connection method is via a Plug / solder connection, with a degree of protection rated at -. The sensor operates reliably in ambient temperatures ranging from -40 Β°C ... 70 Β°C. Elevate Your Project with a Quote for your requirement of Phoenix 110 V DC Voltage Miniature Relay. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.

Disclaimer: IndMALL serves solely as a platform connecting buyers and vendors. It does not participate in pricing, payment, or delivery of goods.
Buyers are advised to verify all details and deal directly with vendors before finalizing any transaction.