Phoenix FL SWITCH 1000T-2POE-GT-2SFP Industrial Ethernet Switches
The Phoenix FL SWITCH 1000T-2POE-GT-2SFP Power Supply (Part No: 1026765 ) offers a Screw connection method, 10/100/1000 Mbps transmission speed, 52 V DC ... 57 V DC (>52 V DC for PoE+ recommended) supply voltage range, IP30 degree of protection. Manufactured by Phoenix under the Phoenix Industrial Ethernet Switches category, this model belongs to the Phoenix FL Series.
| Brand | Phoenix Contact |
| Product Type | Industrial Ethernet switches |
| Model Number | FL SWITCH 1000T-2POE-GT-2SFP |
Phoenix FL SWITCH 1000T-2POE-GT-2SFP Industrial Ethernet Switches
| Specification | Value |
|---|---|
| Width | 42.8 mm |
| Height | 100 mm |
| Depth | 101 mm |
| Mounting type | DIN rail mounting |
| Connection method | Screw connection |
| Transmission speed | 10/100/1000 Mbps |
| Transmission length | 100 m (Between transmitter / receiver) |
| Signal LEDs | LNK/ACT, POE |
| No. of channels | 2 (RJ45 ports) |
| Product type | Switch |
| MTTF | 45.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
| Article revision | 1 |
| Supply voltage (DC) | 55 V DC (redundant) |
| Supply voltage range | 52 V DC ... 57 V DC (>52 V DC for PoE+ recommended) |
| Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
| Max. current consumption | 1.2 A (Maximum, nominal load) |
| Typical current consumption | 80 mA (at US = 55 V DC) |
| Degree of protection | IP30 |
| Ambient temperature (operation) | -40 °C ... 75 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Status display | LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port |
The Phoenix Contact FL SWITCH 1000T-2POE-GT-2SFP, part number 1026765, is a compact and rugged Phoenix 2 SFP Unmanaged PoE Switch engineered for high-speed Ethernet communication in harsh industrial environments. This unmanaged model features 2 RJ45 ports with 10/100/1000 Mbps data rates and PoE+ support, enabling simultaneous data and power transfer up to 100 meters—ideal for powering IP cameras, sensors, or remote devices directly through the Ethernet cable.
The unit offers reliable DIN rail mounting and utilizes screw connection terminals for vibration-resistant wiring. It operates on a 55 V DC redundant power supply, with low typical current consumption of 80 mA, making it highly energy-efficient. Diagnostic indicators include LEDs for power status, alarm signals, link/activity, and PoE load per port. The switch meets EMC Directive 2004/108/EC compliance and is rated for IP30 protection, shock resistance up to 30g, and operating temperatures between -40°C to +75°C. This makes it suitable for deployment in factory automation, utility substations, and outdoor enclosures. For more industrial networking options, visit the Phoenix Contact brand page.
This device enables rapid network deployment without programming, and the PoE+ feature eliminates the need for extra power wiring. Its robust design ensures consistent operation in high-vibration, high-temperature, or electrically noisy environments. Maintenance teams benefit from clear LED feedback and secure screw terminal wiring, while system integrators value the cost-effective performance and space-saving design.
When you need a compact unmanaged PoE switch that supports fiber-ready expansion, count on Phoenix Contact FL SWITCH 1000T-2POE-GT-2SFP.
Related Products
