Phoenix FL SWITCH 2306-2SFP PN Industrial Ethernet Switches
The Phoenix FL SWITCH 2306-2SFP PN Power Supply (Part No: 1009222 ) offers a Push-in spring connection method, 100/1000 Mbps (full duplex) transmission speed, 12 V DC ... 57 V DC supply voltage range, IP20 degree of protection. Manufactured by Phoenix under the Phoenix Industrial Ethernet Switches category, this model belongs to the Phoenix FL Series.
| Brand | Phoenix Contact |
| Product Type | Industrial Ethernet switches |
| Model Number | FL SWITCH 2306-2SFP PN |
Phoenix FL SWITCH 2306-2SFP PN Industrial Ethernet Switches
| Specification | Value |
|---|---|
| Width | 45 mm |
| Height | 130 mm |
| Depth | 119 mm |
| Housing material | Polycarbonate fiber reinforced |
| Mounting type | DIN rail mounting |
| Connection method | Push-in spring connection |
| Transmission speed | 100/1000 Mbps (full duplex) |
| Transmission length | up to 80 km (Depending on the fiber/SFP module used) |
| Signal LEDs | Data receive, link status |
| No. of channels | 2 (SFP ports) |
| Product type | Switch |
| MTTF | 491.44 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| Article revision | 6 |
| Supply voltage (DC) | 24 V DC (redundant) |
| Supply voltage range | 12 V DC ... 57 V DC |
| Power supply connection | via COMBICON, max. conductor cross section 1.5 mm² |
| Max. current consumption | 1.5 A (US = Min, Tamb = Max, DOI = Max) |
| Typical current consumption | 280 mA (at US = 24 V DC and 25 °C ambient temperature) |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Noise emission | EN 61000-6-3 |
| Status display | LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (link/activity and speed), PROFINET status LEDs (BF, SF) |
| Shock (operation) | 30g (EN 60068-2-27) |
| Vibration (operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
The Phoenix Contact FL SWITCH 2306-2SFP PN, part number 1009222, is an advanced Phoenix 6 RJ45 ports Managed Switch equipped with 2 SFP fiber ports that support 100/1000 Mbps full-duplex transmission. The switch enables extended communication distances of up to 80 km, depending on the SFP module and fiber used, making it a suitable choice for expansive factory floors and industrial buildings where long-range connectivity is essential.
Engineered with a polycarbonate fiber-reinforced housing, this unit offers reliable operation in demanding environments. The DIN rail mounting design simplifies panel installation, while the push-in spring connection ensures stable and secure wiring. It operates on a 24 V DC redundant power supply and consumes just 280 mA typically, promoting energy-efficient performance. Diagnostic LEDs on each Ethernet port provide real-time link/activity and speed status, while PROFINET status LEDs (BF, SF) offer advanced network fault monitoring. Rated for harsh industrial use, this device withstands 30g shock and 5g vibration and complies with EMC Directive 2014/30/EU. With a long lifecycle of MTTF 491.44 years, this managed switch delivers proven dependability in automation networks.
For high-performance Ethernet switching and fiber integration in industrial environments, FL SWITCH 2306-2SFP PN is a trusted solution from Phoenix Contact.
